The Apex ATB-C-Series is a precision planetary gearbox designed for AGV applications. The unique rotary housing allows a drive wheel or pully to be mounted over the exterior, burying a large part of the gearbox in the wheel or pulley. The result is space savings in the robot or cart.
The ATB-C is also available with a shaft input, which allows the gearbox to be driven by belt and pulley.
OVERVIEW
TRAVERSING AXIS CONTROLLED BY
SERVO DRIVEN
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
5 SPARE INPUTS AND 8 SPARE OUTPUTS FOR INTERFACING WITH OTHER ANCILLARY：
1) Parts Removal:Easy to manoeuvre within mould area and use unconventional
paths to remove mouldings and reduce end-of –arm tooling cost
2) Parts drop off:
① 9 programmable positions within 2 areas, totaling 18 points.
② Additional cross axis setting can reach 36 points.
③ Rapid setting using pitch to reach 99 points
④ Additional cross axis setting can reach 198 points.
3) Peripheral equipment:Connect to conveyor, mist sprayer, sprue cutter, sensors
and other equipment to complete the automation system.
4) Inspection:
① Reject program: Detects signal from the moulding machine and places reject
parts in different areas.
② Inspection program: Places part in different area for QC inspection, for
example every 100 cycles.
③ Test-mould program: Allows checking of parts at the beginning of each
automatic moulding cycle before cycle counter starts
④ Parts counter: Counts the total number of good parts and stops robot operation once count target is met.
